韩国工程POM Kepital FG2015 产品特性：含15%玻纤增强，中等粘度，适用于对刚性、耐疲劳性、耐蠕变性和耐热性要求特别高的产品
我公司提供的产品均为正牌塑胶原料，品质保证，货源稳定，送货上门，可免费提供官方物性表、UL黄卡，并随货提供RoHS报告、SGS报告等，索取权威资料请致电13268582149
POM FG2015 物性表：
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Density | 1.50 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Melt Mass-Flow Rate (MFR) | 12 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow (2.00 mm) | 0.80 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Strength (Yield, 23°C) | 111 | MPa | ASTM D638 |
| Tensile Stress (Break, 23°C) | 120 | MPa | ISO 527-2 |
| Tensile Elongation (Break, 23°C) | 3.0 | % | ASTM D638 |
| Tensile Strain (Break, 23°C) | 3.6 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 5350 | MPa | ASTM D790 |
| Flexural Modulus (23°C) | 5200 | MPa | ISO 178 |
| Flexural Strength (23°C) | 157 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 175 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
| Charpy Notched Impact Strength | 7.0 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (3.20 mm) | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 164 | °C | ASTM D648 |
| Melting Temperature | 165 | °C | ASTM D3418 |